DSLRKIT PT-08XT 8 Channels Wireless/Radio Flash Trigger W/ Antenna W/ 4 Receiver

DSLRKIT PT-08XT 8 channels Wireless Flash Trigger
(This SET include 1 Transmitter and 4 Receivers)
Introduction
DSLRKIT's latest radio trigger,easy to use,simple and safe.
"XT" means eXTreme,PT-08XT is the final version of DSLRKIT's 433MHz trigger.
This time we added an antenna to increase the working range and reduce misfire.
We tested in open space. No obstruction such as cars, building or any structures, etc.
the effective distance can up to 100 meters,and almost no misfire at 100 meters.
Compared with PT-04 and RC-08,PT-08XT's transmitter provided a battery door that you can change the battery easily now.
A large hot shoe locking wheel makes you feel more comfortable when using it.
The receiver retained the PC sync port,more reliable with screw lock.
If you are an user of PT-04 or RC-08,you can simply upgrade your system by purchase a new Transmitter of PT-08XT.
8 channel Trigger Transmitte​r for DSLRKIT PT-08XT PT-08...
100% compatible with DSLRKIT PT/DC/AC/RC series flash trigger(Except PT-16/PT-16NE).
compatible with:
PT-04,PT-04NE,AC-04,DC-04,RC-08A,RC-08H,AC-08,DC-08
Max Sync Speed
1/250 s
Flash Connection
PC sync port, Hot shoe
Power Supply
AAA battery,23A
Channel
8
Flash Mode
M
Frequency
433MHz
Trigger Voltage Maximum Limit
230v
Hot Shoe on Transmitter
No
Remote Shutter Control
No
Antenna
SMA,2 dBi,5cm
Tested maximum effective distance
100m (open space)
Test Button
Yes
Umbrella Holder
No
TTL
No
Battery(ies) included
23A
How to use:
• Make sure the channel selector of both transmitter and receiver at same position
• Insert your flash hot shoe socket into the receiver's hot shoe jack
• Press the test button on your transmitter. The Flash should now flash
• Insert the transmitter's hot shoe socket into your camera's hot shoe jack
• (if your camera does not have a hot shoe use a PC sync cord and insert into the socket)
• You should now be ready to start shooting
Notice:
If you use Nikon i-ttl system flash on this trigger,please confirm the flash is working in "M" mode,the receiver can not work with i-ttl flash in "ttl" mode,any i-ttl flash without manual mode will not work properly.
larger hot shoe locking wheel than PT-04 trigger:
Transmitter sync with camera's PC port,cable free included,then you can mount your flash on camera as well.
One receiver can connect two flashes:
(cable need purchase separately)
Receiver's PC sync port with screw lock:
Male to Male M-M FLASH PC Sync Cable Cord w/ Screw Lock
Flash on receiver's hot shoe:
(flash stand not included)
Receiver mounted on tripod with 1/4 screw mount:
(tripod not included)
Wireless studio light trigger mode:
(sync cable need purchase separately)
3.5mm 1/8" to Male PC Sync FLASH Cable with Screw Lock
6.35mm to Male PC Sudio FLASH Sync Cable YONGNUO RF-603
Receiver use two AAA batteries,metal 1/4 screw mount.
Package Included:
1. PT-08TX 8 Channels
Transmitter x1(12V 23A battery inside)
2. PT-08TX Receiver
X4
(
AAA batteries not included
)
3. Sync cord for camera (2.5mm to male) x1
Suitable For
-Canon SpeedLite 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EX/EXII, 430EZ, 420EX, 420EZ, 380EX;
-Nikon SpeedLight SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24;
-Olympus FL-50, FL36;
-Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT;
-Sigma EF-500 DG Super, EF-500 DG ST, EF-430;
-Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D;
-Vivitar 285HV (Older Vivitar 285/283 works only with PC sync);
-Other flash models with a trigger voltage of 12V or lower;
-Work with flash units using universal hot shoe like Nikon, Sigma, Olympus, Pentax (except Minolta SONY as they use a special hot shoe)
Extra Receivers if you need:
DSLRKIT PT-08XT RX Wireless Flash Trigger Receiver for ...