DSLRKIT RF-16NE 2.4Ghz Wireless Flash Trigger For CANON W/ 4 Receivers

DSLRKIT RF-16NE Wireless Remote Flash Trigger
for Canon
(This SET include 1 Transmitter and 4 Receivers)
Extra receivers if you need:
RF-16NE RX Wireless Flash Trigger Receiver for CANON
DSLRKIT RF-16NE use the same system with Pixel PAWN TF-361/362/363/364,It means you can use RF-16NE TX to trigger the PAWN RX or use RF-16NE RX work with PAWN TX.
This flash remote trigger can work as flashgun trigger, studio light trigger, and work with extra shutter remote cord, it can remote control the camera, just like the wireless remote shutter release, support half-press focusing and full-press take the picture. The flash sync speed is up to 1/250s. The shutter control mode included single, continuous, BULB and 4sec delay shooting.
Transmitter has a 3.5mm input socket witch can connect with your camera’s PC sync port. in this case, you can keep on use your hot shoe and trigger the other flashes.
Receiver has a 3.5mm output socket. It can be use to connect your camera’s shutter remote port(Need extra shutter connect cable), or connect the studio flash via attached 3.5mm to 3.5mm sync cord, or connect with the flash via PC sync cord (need to purchase extra 3.5mm to PC sync cable).
And as you can see, in addition to those function, it also have an umbrella holder.
So there is no need to use a light stand bracket, and the flash effectiveness is the same as the item that is used with a light stand bracket.
RF-16NE is using global free channel 2.4GHz and FSK modulation system to make the performance more stable, and work in bigger distance. Particular saving power design can make the transmitter and receiver battery last more time.
Features
1.
Using global free 2.4GHz channel and FSK modulation system, and there's 16 selectable frequency channels.
2.
Flash sync speed is up to 1/250s.
3.
Support the TTL flashgun wake-up function; you'll never miss any shot opportunity.
4.
Fire the flashgun through hot shoe part and fire the studio light through 3.5mm to 3.5mm cable. (you can change 3.5mm to 6.35mm via attached convert adapter)
5.
Supports to control multiple flashguns and studio lights at same time.
6.
Shutter function mode, included single, continuous, bulb and 4sec delay shooting.
7.
Supports to control multiple cameras to take shots at the same time.
8.
Operating distance is more than 100 meters. (outdoor without obstacle, we tested the max distance is 200 meters)
9.
Ultra-low standby power consumption; transmitter standby time is more than 2 years, and receiver standby time up to 300 hours.
10.
Low voltage design, it's able to use rechargeable batteries.
11.
Power supply use 2*AAA batteries.(transmitter and receiver)
12.
With umbrella holder
Functions
Type:
Using FSK 2.4GHz Wireless Remote Control System
Operation
Range
:
100 meters
Channel:
16
Shutter release
Half-perss, Full-press
Transmitter stand-by time:
2 years or >10000 Timer (2x AAA alkaline cell)
Receiver stand-by time:
45 Hours(2x AAA alkaline cell)
Dimensions ( W x L x H):
Transmitter: 76mm x 36 mm x 35mm
Receiver:
76mm x 61 mm x 38.7 mm
Weight:
Transmitter: 50 g (with battery)
Receiver:
60 g (with battery)
1.Wireless flash trigger mode:
Transmitter compatible with the device under flash trigger mode:
Model
Compatible device
RF-16NETX
for Canon
Canon EOS: 1D series, 5D series, 7D, 6D
60D, 50D, 40D. 30D, 20D, 10D,
650D,600D,550D, 500D, 450D, 400D, 350D,
1100D, 1000D
Rebel T4i,T3i, T3, T2i,T1i,XSi,XS,Xti,Xt,
Powershot G10, G11, G12.G15 G1X SX50
RF-16NETX
for Nikon
Nikon: D7100 D7000, D5200 D5000, D5100, D3200,D3100, D3000, D600
D4 D3X D3, D800E D800,D700, D2 series, D300 series, D200,
D90, D80s D70 series, D60, D50, D40 series, F6,
Nikon i-TTL COOLPIX: COOLPIX8800, COOLPIX8400, COOLPIX P5000, COOLPIX P5100,COOLPIX P6000
FUJI
: S5 Pro,COOLPIX A COOLPIX P7700
Receiver compatible with the device under flash trigger mode:
Model
Compatible device
RF-16NERX
(for CANON)
Canon
Speedlite: 600EX-RT,580EX II, 580EX, 430EX II, 430EX, 270EX, 220EX
(Compatible with other brads for CANON TTL flash)
RF-16NERX
(for NIKON)
Nikon: SB-900, SB-700, SB-800, SB-600,
(This item is not compatible with SB-400),
(Compatible with other brands for NIKON TTL flash)
NOTE:
Compatible with other brands flash (Wake up can only used in TTL Compatible flash)
moreover,receiver can connect more flashes:
2.Wireless Flash trigger via 3.5-PC Sync cord :
(NOTE: this mode can not support 1/250sec sync, max to 1/200sec.)
(NOTE: This mode will lose Flash wake up function.)
3.Wireless Remote Control mode:
(The shutter control mode included single, continuous, BULB and 4sec delay shooting.)
Compatible with the device under shutter release mode:
Model
Plug
Compatible device
RF-16NE
Receiver
3.5-E3
Canon 650D,60D, 600D, 550D, 500D, 450D, 400D, 350D,1100D, 1000D
Rebel T4i,T3i, T3, T2i,T1i,XSi,XS,Xti,Xt,
Powershot G10, G11, G12.G15 G1X SX50
3.5-N3
Canon EOS: 1D series, 5D series, 7D, 6D 50D, 40D. 30D, 20D, 10D
3.5-DC0
Nikon: D3 series, D2 series, D800E D800,D700, D300 series, D200.D4 D3X
Fujifilm: S3 Pro, S5 Pro.
Film SLR
Nikon F6 F5 F100 F90 / F90x N90 / N90x
3.5 -DC1
Nikon: D80, D70, D70S
3.5-DC2
Nikon: D7100 D7000, D5200 D5100, D5000, D3200,D3100, D90.D600
4.Wireless studio light trigger mode:
Package Included:
RF-16NE (Transmitter) x1
RF-16NE (Receiver) x4
3.5mm to 3.5mm studio flash cable x4
3.5mm jack to 6.35mm plug x4
Receiver holding mount x4(The holding mount is for studio lamp. It has double tape sticker)
Receiver Hot shoe protection cover x4
English User Manual x1
Notice:No retailing Box,pack safely in Bubble bag
Below accessory you need to order seperately:
RF-16NE RX Wireless Flash Trigger Receiver for CANON
3.5mm to FLASH PC Sync Cable for ROOK RF-16NE RF-603
J3.5-30/N3 Remote Cable for DSLRKIT RF-16NE PIXEL ROOK
J3.5-30/E3 Remote Cable for DSLRKIT RF-16NE PIXEL ROOK
J3.5-30/DC2 Remote Cable for DSLRKIT RF-16NE PIXEL ROOK
J3.5-30/DC0 Remote Cable for DSLRKIT RF-16NE PIXEL ROOK